Main structure:
The disposable non-invasive EEG electrode product is composed of electrode piece, connector and conductive gel.
Product Performance:
- AC impedance: ≤ 1KΩ (10HZ), DC offset voltage: ≤ 100mv, internal ≤ 150μv.
- Simulated defibrillation overload recovery performance: The voltage value of electrode pair at the 5th s after discharge is ≤ 100mv; the average change rate at 30s after discharge is ≤ ± 1 mV/s.
- AC impedance after simulated defibrillation: ≤ 1KΩ (10HZ).
- Bias current tolerance: ≤ 70mv.
- Cytotoxicity test: Cytotoxicity test shall not exceed 1; there shall be no skin sensitization response; there shall be no skin irritation response.
Instructions for use:
This product shall be used in combination with the required model: For the matching compatible equipment, the degree of protection against electric shock of its applied part shall be at least F-type applied part. Cleaning before use:
- Always check whether the product is compatible with the instrument, whether the performance is normal, whether there is damage to the appearance before use, and only good product can be used;
- Take out the disposable non-invasive EEG electrode and adhere to the patient 's head according to the requirements for cable or lead wire.
- Connect the connection site of disposable non-invasive EEG electrode to the cable.
- If the patient has more hair, scrape the hair at the selected electrode end, then clean and dry the skin and adhere the electrode to the correct part of the patient.
Superior quality product with competitive price, and good service are the best reason you choose JCR Medical Disposable Non-Invasive EEG Electrodes. If any interested welcome to contact us without hesitation.
Our main service:
•Disposable BIS EEG Sensor Electrode
Welcome to quote for your projects:
Contact: sales018@jcr-med.com
Whatsapp/phone/Wechat : +86 18071931385